Posts Tagged space
The Smart and Cool Way to Go for Car Stereo and Car Alarm Installation
Posted on October 30, 2011 | Car Alarm, Car Stereo.
In today’s hi-tech and state of the art motors and vehicles, there is practically no use of going for the car alarm installation as they are already fitted with one. But, this is not the case if you have an old model motor or vehicle with only few electronic gadget systems and no car stereo products. In these oldie auto and vehicle models, it becomes very important to go for auto stereo system and auto alarm installation. With the latest auto alarms and car audio system models available in the market, the very first thing which you need to do is choose the model which is compatible with your motor or vehicle electromotive setting.
Next, you should have the necessary tools available so that installation procedures can be started. The most common tools which are needed for the car audio system and car alarm installation use includes wire cutters, screwdriver set, electrical tape, Wire Stripper and of course the device. One thing which you need to keep in your mind when installing auto stereo player is to keep the space empty so that car amplifier installation can also be done. If you are not in a hurry to opt for vehicle amplifier installation now, even then, you should keep the space for car amplifier so that it can be easily fitted with the auto stereo player later on.
If you have to do vehicle audio system as well as car alarm installation, it would be pretty necessary that you start with the installation of car audio system. This is necessary because you will have to connect the car alarm directly to your auto stereo system. Car alarm uses the speakers and amplifiers of vehicle stereo for generating the output.
Start with the actual car stereo installation procedure by reading the technical manual and the wiring diagram. You need to place the wires exactly in the manner as shown in the diagram. If you have bought an integrated car stereo and car alarm system, there will not be any need to go for separate wiring. Common wiring system is laid for the integrated units.
The positive wire coming from each of the speakers will connect to the positive terminal of the vehicle stereo from the back. Next, connect the negative wire from each speaker to the negative terminal of the car stereo system in the back side. Now you connect the ignition wires both + / red to the car stereo system. Remember, if there is only one wire coming out from the speakers, they are fixed to the chassis.
After you have installed the car stereo system, you need to fix the car alarm unit in aspirate slot provided adjacent to the stereo system. The wire from car alarm unit will be fixed to car stereo system. Make sure that you follow the car stereo and car alarm installation procedures one by one and in sequence. Do not try to jump directly to any instruction as this will lead you to confusion.
Increase Safety And Visibility With A Reversing Camera
Posted on September 5, 2011 | Car Camera.
If you drive a large vehicle or your car has a small rear window then you might find it difficult to see everything behind you when you are reversing or parking. This can be a real hassle as you might damage your vehicle by bumping into something or another car while trying to get into a tight parking space. However by using a reversing camera you will be able to see everything to the rear of your car which will make parking much easier and safer.
The system uses a camera mounted on the rear of the vehicle to relay the image to a screen that is mounted inside. This provides a clear and practical solution as it shows potential dangers and obstructions that are not visible when using the rear view mirrors, and it also makes judging the distance of objects easier.
There are many types of cameras available and they can be installed in the bodywork of the car, or attached to the bumper for example to provide a clear view of the rear of the vehicle. The camera is connected to a screen inside the car where the image is displayed. The screens are usually small LCD screens that can easily be attached to the dashboard of your vehicle by using a bracket or mount and they can even be connected to the gearbox to automatically switch on when you choose the reverse gear. There are also screens available that are incorporated into the rear view mirror which makes them easy to view. You can also choose a wireless camera which makes installation even easier as you won’t have to connect it to the screen inside with a cable. Some of the cameras also feature a night vision or light function which makes parking at night in the dark much easier.
There are many advantages to having a backup camera system installed. Firstly they are a great choice for safety, you will be able to see if there is anyone behind you before reversing, like kids or animals playing in the drive for example, it’s difficult to see small objects like kids bicycles with only the rear view mirrors but with a camera installed you will be able to see everyone and everything which will really help to avoid accidents. Another great thing is that you will be able to avoid damage to your car while parking, it’s easy to scrape the paintwork or dent the bodywork and this can be costly when it comes to repair bills or an insurance claim if you accidentally hit another car.